kernel-power-flasher

Linux kernel updater for an enhanced Maemo 5 kernel 2.6.28.10

This package will flash the kernel image upon installation.
You must shutdown and boot your device again for the kernel to become active.

If you want to revert to the stock Nokia kernel, run
“apt-get install –reinstall kernel kernel-flasher” as root
or use the flasher to flash the extracted zImage from the firmware image.
For discussion of the kernel please visit http://talk.maemo.org/showthread.php?t=43420

This custom kernel contains additional modules for IPv6, packet filtering,
QoS, NAT, tunneling, kernel configuration, Wifi mesh networking,
builtin ext3 for booting from other media, ext4, XFS, reiserfs,
NTFS read support, ISO9660, UDF, CIFS, automounter, squashfs,
unionfs, device mapper and dm-loop, cryptography, cryptoloop,
EFI partitions, UTF8 codepages, mouse+joystick input, PPP, PPTP,
serial support, USB/IP and generic USB device drivers, battery info,
overclocking and kexec support.

Warning: Overclocking may damage your device, void your warranty and is at your own risk!
Overclocking is disabled by default and needs to be enabled during runtime.

Known bugs: Touchscreen calibration (osso-applet-screencalibration) is incompatible
with the enabled evdev modules. You need to use the stock Nokia kernel for calibration.